← All builds

Windmill

An octagonal cobblestone and oak windmill with a cone roof, four wool sails and wheat fields

Drag to spin · scroll or pinch to zoom · right-drag to pan

A windmill instantly makes a farm or village look finished. This one has an octagonal base of cobblestone, oak plank walls, a spruce log ring and a cone roof made of three rings of stairs.

On the front, a spruce log hub holds four sail arms with white wool sails, all turned the same way so it looks like it is spinning. Two small wheat fields either side of the path complete the scene.

What you need

434 blocks in total. Flowers and bushes are optional decoration.

Oak Planks132
Cobblestone83
Spruce Stairs48
Farmland46
Wheat Seeds46
White Wool32
Spruce Log21
Dirt Path8
Oak Fence5
Glass Pane4
Water Bucket2
Oak Leaves2
Oak Door1
Chest1
Crafting Table1
Lantern1
Spruce Planks1

How to build it, layer by layer

Use the slider in the 3D view above to see each layer, or press Build it to watch the whole thing go up block by block.

  1. Layer 1. Octagon floor of cobblestone (7 x 7 with the corners cut). Hoe two small wheat fields either side of the path, each with a water block.
  2. Layer 2. Cobblestone walls around the edge of the octagon. Door at the front, chest and crafting table inside. Plant wheat.
  3. Layer 3. Second cobblestone layer. Lantern inside.
  4. Layer 4. Switch to oak planks for the walls.
  5. Layer 5. Oak planks. The bottom sail arm reaches down to here at the front.
  6. Layer 6. Oak planks with 4 windows.
  7. Layer 7. Oak planks. The left and right sail arms come later at the hub height.
  8. Layer 8. Oak planks.
  9. Layer 9. Oak planks. The spruce log hub sticks out of the front wall here, with the left and right sail arms (5 long, wool sails 2 wide).
  10. Layer 10. Spruce log ring on top of the walls.
  11. Layer 11. First ring of the cone roof: spruce stairs all the way round, facing out.
  12. Layer 12. Second, smaller ring of stairs.
  13. Layer 13. Third ring of stairs. The top sail arm reaches up past the roof.
  14. Layer 14. Spruce plank cap on the very top.
  15. Layer 15. Fence post as a little spire.

Tips

Questions

Can I make the sails spin?

Not without mods or command blocks. The sails are set at a slight turn so they look like they are moving.

What can I use the windmill for?

Use the inside as a storage room for your farm: chests for wheat and seeds, and a crafting table for bread.

How tall is the windmill?

15 layers to the top of the spire, and the top sail arm reaches about 14 blocks high.

More builds

Lighthouse 3D build guide
Lighthouse
A red and white striped lighthouse on a rocky island, with a gallery and a glowing lamp room
Medium22 layers326 blocks
Bridge 3D build guide
Bridge
A stone and spruce bridge over a river with stone piers, fence railings and lanterns
Easy5 layers257 blocks
Cozy Starter House 3D build guide
Cozy Starter House
A 9 x 7 survival starter with a gable roof, chimney and lanterns
Easy10 layers314 blocks
Farmhouse 3D build guide
Farmhouse
A 9 x 7 farmhouse with a front porch, steep roof and its own fenced vegetable patch
Easy10 layers502 blocks
Log Cabin 3D build guide
Log Cabin
A 9 x 7 cabin of sideways spruce logs with a covered front deck, steep roof and stone chimney
Easy11 layers412 blocks
Modern House 3D build guide
Modern House
White concrete, a glass wall, a cantilevered upper floor, roof terrace and a small pool
Medium9 layers603 blocks